Arduino LED "Roto" Clock and other Arduino Projects

A place for software, hardware and DSP-based audio gizmos. All things code and the hardware that runs it. Time and amplitude are described in bits and pieces here. Links to interesting gizmos and software.
User avatar
mediatechnology
Posts: 4188
Joined: Sat Aug 11, 2007 2:34 pm
Location: Oak Cliff, Texas
Contact:

Re: Arduino LED "Roto" Clock and other Arduino Projects

Post by mediatechnology » Thu Jan 30, 2020 4:38 pm

I've been running the clock for 8 days now and the drift, -1 second, is about a -1.45 ppm time base error.

Very good if it was at room temperature but this one has been running in an unheated garage mounted on an uninsulated outside wall. That's excellent.

I have one WWVB synchronized clock that runs with a constant one second offset when it's locked. Bad code.
https://ka-electronics.com

"CDC Set Trap With Coronavirus Allowing a Month of Incubation" https://banned.video/watch?id=5e597d3934e11300790c4735
"Biggest Medical Scandal In History Breaking! UN Comes Clean, Admits Vaccine Death/Damage Coverup" https://banned.video/watch?id=5e1b9ed434b802001ed99b14
Mirror/Download: https://proaudiodesignforum.com/content ... overup.mp4
More: https://proaudiodesignforum.com/content ... People.mp4

terkio
Posts: 169
Joined: Thu Feb 07, 2019 4:17 am

Re: Arduino LED "Roto" Clock and other Arduino Projects

Post by terkio » Thu Jan 30, 2020 8:15 pm

Excellent. The temperature compensation does work perfectly.

One can tweak the clock frequency with the "aging offset" register with a 0.1ppm resolution.

One can get the temperature with a 0.25°C resolution from a 10 bits register.

Post Reply